High Glass Blinds is a high performing deer blind company out of Killeen, TX. American Made top-quality products to give you a lasting blind for years. Our blinds are constructed out of Steel, Aluminum and Glass.
High Glass Blinds is a high performing deer blind company out of Killeen, TX. American Made top-quality products to give you a lasting blind for years. Our blinds are constructed out of Steel, Aluminum and Glass.
The Base
The Base is fabricated out of 11 Guage Steel, from the base, porch, legs, steps and railing. Everything is welded by our top-of-the-line fabricators and made sure to meet industry standards before completion. We weld forklift attachments to the base as well as anchoring points to make the setup in the field easy for your crew.
The Base
The Base is fabricated out of 11 Guage Steel, from the base, porch, legs, steps and railing. Everything is welded by our top-of-the-line fabricators and made sure to meet industry standards before completion. We weld forklift attachments to the base as well as anchoring points to make the setup in the field easy for your crew.
The Base
The Base is fabricated out of 11 Guage Steel, from the base, porch, legs, steps and railing. Everything is welded by our top-of-the-line fabricators and made sure to meet industry standards before completion. We weld forklift attachments to the base as well as anchoring points to make the setup in the field easy for your crew.
The Blind
The blind is fabricated out of 2” x 4 ½” Thermally Broken Black Anodized Aluminum Storefront. A thermally broken frame will have a reinforced polyamide strip made from a non-metallic composite material. Manufacturers will fix the strip between the interior and exterior aluminum profile of the frame to create an insulated barrier. The material for the strip will inherently have a low thermal conductivity to minimize the transfer of heat and cold through the window frame. It can have a hugely significant impact on energy transfer compared to standard wood or aluminum frame. The Aluminum Frame sits in a High-Performance Sill Pan, which will drain the water as it hits the glass and goes into the frame. Weep holes are drilled into the outer face of the pan to allow for the rain to weep out and drain as intended.
The Blind
The blind is fabricated out of 2” x 4 ½” Thermally Broken Black Anodized Aluminum Storefront. A thermally broken frame will have a reinforced polyamide strip made from a non-metallic composite material. Manufacturers will fix the strip between the interior and exterior aluminum profile of the frame to create an insulated barrier. The material for the strip will inherently have a low thermal conductivity to minimize the transfer of heat and cold through the window frame. It can have a hugely significant impact on energy transfer compared to standard wood or aluminum frame. The Aluminum Frame sits in a High-Performance Sill Pan, which will drain the water as it hits the glass and goes into the frame. Weep holes are drilled into the outer face of the pan to allow for the rain to weep out and drain as intended.
The Aluminum
The Aluminum is infilled with 1” Low-E Insulated Glass. This 1” Unit of glass is made up of 2 pieces of ¼” Tempered Glass separated by a ½” Spacer, which is a unique design that creates another point of thermal insulation between the panes of glass. The Air Gap between the ¼” pieces of glass is then filled with Argon gas. Using argon in the air space between the two panes of glass provides further insulation, as these gases are denser than air and less likely to let heat conduct through the IGU. Combined with a low-e glass coating, these gases work to improve the window’s overall u-value, which is a measure of the heat transmission through glass. The lower the u-value, the better the insulating glass unit.
The Aluminum
The Aluminum is infilled with 1” Low-E Insulated Glass. This 1” Unit of glass is made up of 2 pieces of ¼” Tempered Glass separated by a ½” Spacer, which is a unique design that creates another point of thermal insulation between the panes of glass. The Air Gap between the ¼” pieces of glass is then filled with Argon gas. Using argon in the air space between the two panes of glass provides further insulation, as these gases are denser than air and less likely to let heat conduct through the IGU. Combined with a low-e glass coating, these gases work to improve the window’s overall u-value, which is a measure of the heat transmission through glass. The lower the u-value, the better the insulating glass unit.
The Windows
The Windows are Commercial Grade Operable windows that are top-hung and hinge out to a 90 degree, to allow plenty of space for shooting. Each window is 30” wide and 20” tall. These windows are also glazed with 1” Insulated Glass and have a heavy-duty cam-handle on the interior portion of the window to allow for a tightly sealed and waterproof window.
The Windows
The Windows are Commercial Grade Operable windows that are top-hung and hinge out to a 90 degree, to allow plenty of space for shooting. Each window is 30” wide and 20” tall. These windows are also glazed with 1” Insulated Glass and have a heavy-duty cam-handle on the interior portion of the window to allow for a tightly sealed and waterproof window.
The Interior
The Interior is constructed of Tongue & Groove Pine on the ceiling, which is burned and sealed to give it a nice, rustic look for a finished product. The shelves are made from 2”x8” Pine that is also burned and sealed. Commercial grade padding and carpet is installed in the floor to keep the blind quiet.
The Interior
The Interior is constructed of Tongue & Groove Pine on the ceiling, which is burned and sealed to give it a nice, rustic look for a finished product. The shelves are made from 2”x8” Pine that is also burned and sealed. Commercial grade padding and carpet is installed in the floor to keep the blind quiet.
Quality is our number one focus when fabricating these blinds, as each blind is custom built to each of our customers’ wants and needs. We make sure from the start that we are providing each one of our customers with the top-of-the-line product that they deserve. You won’t find anything on the market more meticulous or high quality than you do with us at High Glass Blinds. We strive to put you and your hunters in a blind that is going to create memories for a lifetime.
Quality is our number one focus when fabricating these blinds, as each blind is custom built to each of our customers’ wants and needs. We make sure from the start that we are providing each one of our customers with the top-of-the-line product that they deserve. You won’t find anything on the market more meticulous or high quality than you do with us at High Glass Blinds. We strive to put you and your hunters in a blind that is going to create memories for a lifetime.
PRICING
6’X8′ Blinds
6×8 Ground: $22,000 (5 Windows)
6×8 (6ft Tower): $24,500
6×8 (8ft Tower): $26,000
6×8 (10ft Tower): $28,500
7’X7′ Bow Blinds
7×7 Ground: $24,000 (5 Windows)
7×7 (6ft Tower): $26,500
7×7 (8ft Tower): $28,500
7×7 (10ft Tower): $30,500
8’X8′ Blinds
8×8 Ground: $28,000 (5 Windows)
8×8 (6ft Tower): $30,500
8×8 (8ft Tower): $32,500
8×8 (10ft Tower): $34,500
7’X10′ Blinds
7×10 Ground: $32,000
7×10 (6ft Tower): $34,500
7×10 (8ft Tower): $36,500
7×10 (10ft Tower): $40,500
10’X10′ Blinds
10×10 Ground: $45,000
10×10 (6ft Tower): $50,000
10×10 (8ft Tower): $55,000
10×10 (10ft Tower): $60,000
Custom Options We Can Discuss. Pricing Will Vary on Blind Size, Windows (Bow, Rifle or Combo), and Platform Size.
ADD-ONS
Solar Package – Add $1,200
Gun Mounts – Add $400
GlassParency – Add $800
Custom Logo Engraved – Add $800
We do not stock any blinds at the moment and production will not start until the blind is purchased.
Pricing does not include sales tax or shipping but if you’re located in Texas we will deliver for free!
Please give me a call or email me back if you have any questions or I can help at all!